Geosynthetic & Storm Water management Products

Ferguson is proud to provide product from the following geosynthetic and stormwater management capabilities and vendors:


Erosion and Sediment Control

Erosion control and sediment separation are accomplished by many different methods and with various products.

Erosion Control (Veneer Stability):

  • Rolled Erosion Control Blankets
  • Sprayed Erosion Control
  • Turf Reinforcement Mats
  • Natural and Synthetic Wraps (both vegetated and un-vegetated)
  • Coir Logs and Walls

Slope Stability:

  • Geotextiles
  • Geogrids
  • Soil Anchors

Sediment Control:

  • Silt Fencing
  • Straw Wattles
  • Silt Snakes
  • Rock Bags
  • Geo Ridge
  • Triangular Silt Dike
  • Dewatering Bags

Geo Cells and Porous Pavements

Geocells

Compared with the labor and expense of conventional masonry or rock alternatives, geocells are lighter in weight, more flexible, easy to handle and install. Their reinforced matrix provides real strength that anchors the surfaces of the steepest slopes reliably year after year. Slope surfaces remain stable and free from erosion. Under demanding slope and weathering conditions, when properly installed, it is durable, and does not crack, decay, or sag.

Porous Pavements

With a focus on green spaces, reducing the footprint of non-porous areas, and creating esthetically pleasing sites, porous pavements allow a site to remain functional, yet allow the use of best practices and earth friendly.

Membranes and Liners

There are several membrane and liner products with various applications and utilizations. However, membranes and liners all share one simple feature: they provide a barrier to prevent the crossing of elements.

The most typical membranes and liners used in industry today are:

  • PE/PVC Liners
  • Geomembrane Liners
  • Geosynthetic Clay Liners (GCL)
  • Specialty Geotextiles

Retaining Walls

Retaining walls allow property owners to maximize their land use and using geosynthetics to build the walls help to minimize the construction cost. Products to help address your retaining wall solutions include:

  • Gabions
  • Mechanically Stabilized Earth
  • Geogrids with segmented concrete blocks
  • High Strength Woven Fabrics

Roadway Construction - Applications and Design Challenges

The top two leading cause of pavement and roadway failure in the U.S. is contamination of the aggregate base resulting in the loss in aggregate strength, and improper drainage.

Geotextiles provide four important functions which enhance roadway performance:

  • Separation
  • Stabilization
  • Reinforcement
  • Drainage

Ferguson Waterworks has a complete line of woven, non-woven geotextiles and geo grids to address and solve the needs of your project.

  • Asphalt Overlays
  • Inlet Protection
  • Porous Pavements
  • Road Drainage
  • Substrate Separation and Stabilization
  • Unpaved Roadways

Stormwater, Drainage and NPDES Compliance Products

The National Pollutant Discharge Elimination System (NPDES) program has been revised to include municipal stormwater discharge controls. Each city/municipality is required to establish a set of Best Management Practices (BMP) that address the approved group of stormwater controls required to improve the water quality.

Ferguson offers a variety of products to meet your Federal and Local stormwater management needs.

  • Silt Fencing
  • Drainage Systems
  • Retention/Detention Systems
  • Dewatering System (Silt Control)